POWER ON/OFF

SET ALERT

MESSAGE MODE

BACKLIGHT

LOCKING/UNLOCKING

ERASE MESSAGES

SET TIME/DATE

ALARM

DIRECTORY

CALL PHRASE

BATTERY INFO

HOME

BACK

Press and release the READ Button. The pager alerts as it powers up.  Now the pager is on standby.

Press MODE Button until OFF appears in the display, then press the SELECT Button, when the pager is off, current time and alarm functions work normally. All messages that were received prior to turning the unit off will remain in memory.

SET ALERT

The pager has 3 standard alert modes; Audio (beep or music), Vibration, or Sleep (no alert).

When the pager is initially turned on, it is automatically set to an Audio alert. To change this alert to another beep or melody, Press the MODE Button until "SET ALERT?" is displayed.  Press the SELECT Button once and the pager displays "AUDIO?" Choices include Music melodies 1-10 and Beep alerts 1-4. Press the SELECT Button again and the pager will display the current alert choice.

By pressing the MODE Button, you can scan the 10 music melodies and 4 beep alerts. Choose the desired alert by pressing the READ Button.

The Vibration alert will silently alert you while Sleep alert emits no alert at all. To set, press the MODE Button until "SET ALERT?" is displayed. Press the SELECT Button once, then the MODE Button until the pager displays "SILENT?" on the display for vibration - or "SLEEP?"  for no alert. When you make your selection, press the READ Button.

MESSAGE MODE

When a message is received, the pager displays "1 PAGE" and depending on the alert mode selected:

BEEP emits a 16 second beep alert.

MUSIC melody plays twice.

VIBRATION 8 second vibration.

SLEEP no alert.

To stop any alert, press any button.

REMINDER ALERTS

If no button is pressed after a message is received a reminder alert will emit every 2 minutes except in Sleep mode.

READ MESSAGES

Press the READ Button to read a message. If the message is continued, the mark ► displays - To continue, press the READ Button again.  Date and time are stamped on each message received.

DIRECTORY

The directory (with the ability to store up to 10 numbers) can be used as an additional memory or as a phone book to store your important numbers. While reading a message, you can imprint a copy of the message into the directory. To do so, press the SELECT Button until a phone icon appears, and press the MODE Button to imprint a copy into your directory. (Please note that the directory can only store 12 digits per memory, and is unable to store alphanumeric messages). To access your memory, press the SELECT Button until "DIRECTORY" appears on the screen and press MODE Button. Use the READ Button to read through all your directory messages. Messages stored in the directory can also be lock/unlocked and Individually erased.

BATTERY INFO

This pager uses only AAA Alkaline batteries. Do Not use "Heavy Duty" batteries or rechargeable batteries.

When battery is low, Lo-Battery and a low battery icon will be shown on display.

When needed, a backlight can be activated by pressing the SELECT Button. The light will automatically shut off in 20 seconds after no activity. OR press the SELECT Button again to turn the light off.

LOCKING

Locking a message can help prevent the accidental deletion of a message. Up to 8 messages can be locked at a time. Using the READ Button, select message to be locked. Press the MODE Button until the lock icon appears at the top of the screen. Then press the SELECT Button. Message has been locked and cannot be deleted unless unlocked.

To unlock a message, use the READ Button, select message to be unlocked, press the MODE Button once to remove the lock. Message can now be deleted.

ERASE MESSAGE

Use the READ Button, select message to be deleted. Press the MODE Button until a scissors icon appears at the top of the display. Then press the SELECT Button to delete message.

In standby mode while not viewing messages, press the DELETE MODE Button until the works "CLEAR ALL?" appears on the screen. Press the SELECT Button once. All unlocked messages are deleted.

* Locked messages are not deleted in "CLEAR ALL" mode. To delete all messages in "CLEAR ALL" mode, first make any locked messages unlocked.

SET DATE/TIME

Press the READ Button until "SET TIME?" appears on the screen.  Press the SELECT Button once.

Use the MODE Button to pick the current day-of -the-week. The character letters appear in the top left of the display.

Then press the SELECT Button once.

Press the MODE Button to choose the Month. Then press the SELECT Button once.

Next, press the MODE Button to choose the day-of-the-month.

ALARM

There are 3 separate alarms.

Press the MODE Button until "SET ALARM" appears on the screen.

Press the SELECT Button once to enter alarm mode. To set alarm #1, press SELECT Button again and the word "OFF" will blink. To turn ON, press MODE Button once.

Press SELECT Button once again then using the MODE Button change the hour of day to the desired number.

Press the SELECT Button once to go the the minutes and using the MODE Button, change the minutes to the desired number.

Repeat for A for AM or P for PM.

When complete, press the READ Button. For alarms 2 or 3, after accessing alarm function press the MODE Button once more for alarm#1 and again for alarm #3. Set them exactly the same way. To turn off any alarm, while in that alarm mode, change the "ON to "OFF".

CALL PHRASE MESSAGES  YOU CAN LINK UP TO 4 PHRASES

Dial pager number, wait for connect tone.

Press "*" once.

Then press "#" and " code #" below, then the number you want them to call you back at.

Then press "*" twice to end call.

EXAMPLE:  Dial pager number, wait for connect tone.

                 *#07*#04*#11 1234567

The pager will display " hello, call home, I miss you. 123-4567.

Then the pager will display the phone you are calling from (Caller ID)